Explore a conductor at two scales: measure current and potential difference in a circuit, then inspect a representative microscopic segment. GCSE and A-level modes connect charge conservation, resistance and energy to a particle explanation.
What you can investigate
- Linked microscopic and circuit views
- Equal series currents and electrical energy transfer
- Wire length, area, resistivity and temperature
- Metal and NTC thermistor comparison
- Random motion, scattering and mean drift
- Captured readings, graphs, CSV and saved experiments
Does the wire use up current?
- Compare A1 and A2 with the switch closed, then open it and run the microscopic motion.
- Close the switch and change the voltage. Capture three readings and compare the currents on either side.
- Inspect the voltage across the sample and its heating power. Explain what is transferred and what is conserved.
Current is the same throughout this series circuit. The sample transfers energy to its material without consuming charge. In the steady model the field supplies energy to mobile carriers as they scatter.
Interpreting the model
Ideal DC meters and a finite series resistor. Temperature is externally controlled; self-heating and switch transients are omitted. Random-flight paths, lattice vibration and NTC carrier counts are schematic. Drift is exaggerated relative to random motion. Electrical readings are analytical, not inferred from drawn particles. The NTC model has no wire geometry or quantitative drift prediction.
Revision and practice