Follow an electromagnetic wave through space, then compare the fields with a time trace at a movable detector. Explore the spectrum, polarising filters and directional reception in GCSE and A-level modes.
What you can investigate
- Perpendicular electric and magnetic fields in three dimensions
- Finite propagation of source and filter changes
- Linked spatial wave and local time trace
- Ideal polarising filters and the three-filter experiment
- Directional detector and aerial alignment
- Spectrum scales, time cursors and captured measurements
Can a detector read zero when a wave is present?
- Choose the aerial-alignment investigation and run the wave.
- Compare the field at the probe with the flat detector trace. Rotate the probe axis to align with E.
- Capture at 0, 45 and 90 degrees, then compare with crossed filters that remove the transmitted field itself.
The non-invasive directional detector responds to the component of E along its axis. A crossed probe rejects a present wave; crossed ideal filters can block its transmission.
Interpreting the model
Linearly polarised or unpolarised radiation in vacuum. Unpolarised field directions are shown schematically; intensity and RMS readings use an ensemble average. One ideal filter transmits half of unpolarised input, while an aligned filter transmits all of a linearly polarised input. Source and filter changes propagate at c. E and B use separate visual scales, and changing spectrum band rescales the display. Diffraction, reflection, near fields and detector calibration are omitted.
Revision and practice