PhysicsUKInside a Wire

THE CIRCUIT OUTSIDE. THE PHYSICS INSIDE.

Does the wire use up current?

01 / MICROSCOPIC VIEW

Inside the nichrome wire

20 °C
Positive metal ionsMobile electronsTracked carrier
Conventional current → · electron drift ←
0.0 s

Representative segment · particles enlarged · drift exaggerated relative to random motion.

02 / LINKED CIRCUIT

Follow the charge. Measure the energy.

A₁ · before—
A₂ · after—
Across sample—
Sample resistance—

03 / EVIDENCE

Current and potential difference

Line: model at this temperature. Dots: captured readings for this setup.

Experiment controls

Changes apply to the live circuit. Temperature is held by an ideal bath.

Wire dimensions describe the full circuit sample. The microscope shows a representative segment.

What does this model represent?

Ideal steady DC circuit with a finite series resistor, ideal meters and zero-resistance leads. Electrical readings come from the circuit equations; drawn particles illustrate the mechanism and do not count out the measured current.

Metal ions vibrate about fixed positions. A classical random-flight model illustrates scattering; electron paths and vibration amplitudes are schematic, not a quantum or atomistic calculation. Charge is not consumed by the sample. In steady state the field supplies energy that is transferred to the material.

Drift is enhanced relative to random motion so the overall flow is visible. Fast display speeds are compressed; compare the numerical A-level drift values for physical speed ratios. Balanced random velocities make the displayed group's average motion follow the circuit. Blue circuit dots show net electron flow. An individual electron can still move briefly against the overall drift.

Bath temperature is fixed even while electrical energy is dissipated. There is no self-heating, melting or turn-on propagation model. Opening the switch removes steady current immediately.

Copper: ρ₂₀ = 1.68 × 10⁻⁸ Ω m, α = 0.00393 K⁻¹, n = 8.5 × 10²⁸ m⁻³. Nichrome: representative ρ₂₀ = 1.10 × 10⁻⁶ Ω m, α = 0.0004 K⁻¹; n = 9 × 10²⁸ m⁻³ is an illustrative effective alloy value.

NTC: R₂₀ = 100 Ω, B = 3500 K. Its carrier population illustrates increasing conductivity at constant mobility; there is no quantitative thermistor drift or wire geometry model. Particle count on screen is bounded and schematic.

Choose an investigation

Reveal the explanation

Your measurements

Capture keeps the complete circuit setup. Changing an investigation preserves your readings. Graphs show compatible readings only, so changing a fixed variable starts a separate comparison.

# Sample T / °C L / m d / mm A₁ / A A₂ / A Vsample / V R / Ω P / W

Your setup and readings are recovered on this device. Saved experiments reopen paused.