PhysicsUK simulationsElectromagnetic Radiation

Electromagnetic Radiation Lab

Electric and magnetic fields

01 / THE TRAVELLING WAVE

Electric and magnetic fields in 3D

Microwave
━ E · electric field━ B · magnetic field● Detector

Energy follows the grey arrow · E and B use separate visual scales

02 / THE DETECTOR AT ONE POSITION

Detector readings

Local frequency—
Local wavelength—
Wave transmission—
Directional response—

Run the wave, then click two successive peaks to measure a period.

A / FIRST FILTER
MIDDLE / THIRD-FILTER EXPERIMENT
B / LAST FILTER

Choose an investigation

Reveal the explanation

Controls and model

What am I seeing?

The green and blue curves join field values at different positions at the same instant. Their arrows oscillate at fixed positions. They are not material strings or photon paths. E and B are perpendicular, in phase and transverse to propagation. Their display scales differ: in SI units E = cB.

The wave travels through vacuum. Choose a linearly polarised or unpolarised source. The source has been running before the starting snapshot. Live source and filter changes travel forwards at c; the detector can still receive radiation after the source is turned off. Switching spectrum bands resets the scene scale and clock while keeping captured readings.

Ideal polarisers project the electric field along their marked transmission axes. A first ideal filter transmits 50% of unpolarised input on average. For an already linearly polarised input aligned with it, the first filter transmits 100%. The three-filter 0° / 45° / 90° example transmits 12.5% and 25% respectively.

The unpolarised animation samples changing electric-field directions in short wave packets. It is a schematic illustration, not circular polarisation. Intensity and RMS readings use the ensemble average; a short trace need not have that average. Circular and elliptical polarisation are not modelled.

The probe samples the local field component along its axis without changing the wave. It represents an ideal receiving aerial in the radio/microwave investigations and a directional field probe elsewhere. Its response is relative intensity, not calibrated received radio power. There is no geometric spreading, diffraction, reflection, near field, material dispersion or photon simulation. Abrupt switching is a teaching approximation.

Malus’s law, absolute field intensity and photon energy are optional quantitative extensions. AQA A-level requires polarisation and aerial alignment but does not require Malus’s law. Physical c is 299792458 m/s; the animation is slowed and its length scale is labelled.

Your measurements

Readings describe the radiation at the probe, including any change still travelling along the beam. Saved setups reopen as steady waves; captured measurements retain their original values.

# Band Emitted source f / Hz λ / m Probe / m Axis / ° E rms / V m⁻¹ Transmission Response Settled

Setup, course and readings are recovered on this device. Use Save experiment for a separate file.